Diaphragm bawul mai amfani da pneumatic actuator PTFE PFA Layi
Diaphragm bawul mai amfani da pneumatic actuator PTFE PFA Layi
Pneumatic PTFE PFA Lined diaphragm bawul ƙayyadaddun bayanai
| Pneumatic PTFE PFA Layi diaphragmbawul iko Nau'in Jiki: | kai tsaye ta hanyar simintin gyare-gyare na duniya Fluoride (PTFE, FEP, PFA). |
| Nau'in Spool: | nau'in filogi guda ɗaya mara daidaituwa |
| Girman suna: | DN20 ~ 200, NPS 3/4, ~ 8, |
| Matsin lamba: | PN16 ~ 100, CLASS 150LB ~ 600LB |
| haɗi: flange: | FF, RF, MF, RTJ |
| Walda: | SW, BW |
| Girman Flange: | Dangane da IEC 60534 |
| Pneumatic PTFE PFA Layi mai sarrafa diaphragm bawul Nau'in Bonnet: | Ⅰ: daidaitaccen nau'in (-29 ℃ ~ 150 ℃) |
| Shiryawa: | Nau'in nau'in PFTE tattarawa, sassauƙa.graphite shiryarwa, da dai sauransu. |
| Gasket: | Karfe graphite shiryarwa |
| Mai kunnawa: | Pneumatic: Multi-spring diaphragm actuator, piston irin actuator. |
Jerin Abubuwan
| Sunan bangaren | Material Valve Control |
| Jiki/Bonnet | WCB/CF8/CF8M/CF3M |
| Kayan Layi | PTFE, FEP, PFA |
| Control Valve spool/Kujera | 304/316/316L Layi PTFE/FEP/PFA |
| Shiryawa | PTFE |
| Gasket | PTFE |
| Murfin diaphragm | Na al'ada:Q235, Na musamman:304 |
| diaphragm | NBR tare da ƙarfafa polyester masana'anta |
| bazara | Na al'ada: 60Si2Mn, Na musamman: 50CrVa |
| Sarrafa bawul mai tushe | 2Cr13/17-4PH/304/316/316L |
Ayyukan Valve
| Pneumatic PTFE PFA Layin diaphragm mai sarrafa bawul ɗin Haɓaka | Linear, kashi, saurin buɗewa | |
| Kewayon izini | 30:1 ku | |
| Ƙimar CV | Kashi CV6.3 ~ 400 ， CV mai layi na 6.9 ~ 440 | |
| Pneumatic PTFE PFA Layi mai sarrafa diaphragm bawul Izinin yabo | Hatimi mai laushi: VI grade (jin kumfa) Matsakaicin fitarwa: GB/T 4213 | |
| Pneumatic PTFE PFA Layin diaphragm kula da bawul Ayyuka | ||
| Kuskuren ciki (%) | ± 1.5 | |
| Bambancin dawowa (%) | ≤1.5 | |
| Yankin da ya mutu (%) | ≤0.6 | |
| Bambanci daga farkon zuwa ƙarshen batu(%) | ± 2.5 | |
| Bambancin tafiya (%) | ≤2.5 | |
Bawul actuator ƙayyadaddun bayanai
| Pneumatic fluorine lined bawul iko Nau'in Hanyar | Pneumatic diaphragm actuator |
| PZMA-4~ PZMA-7 | |
| Multi-spring iri | |
| Amfani | Nau'in daidaitawa, nau'in ON-KASHE |
| Matsin iska ko ƙarfin wutar lantarki | Matsin iskar iska (Kewayon bazara) 140 (20 ~ 100) Kpa G 240 (40-200) Kpa G 280 (80-240) Kpa G |
| Mai haɗawa | Mai haɗa bututun iska: RC1/4 |
| Kai tsaye mataki | Ƙaruwar matsi, kara saukowa, bawul kusa. |
| Martani | Ƙaruwar matsi, kara hawan hawan, bawul bude. |
| Siginar shigarwa | 40 ~ 20mA.DC (tare da matsayi) |
| Lag | ≤1% FS (tare da positioner) |
| Nau'in layi | 2% FS (tare da matsayi) |
| Yanayin yanayi | -10℃～+70℃ |
| Pneumatic PTFE PFA Layin diaphragm na'urorin haɗi | E/P, P/P bawul positioner, tace mai sarrafa, bawul Converter, solenoid bawul, iyakance canji Na'urorin haɗi marasa daidaituwa, suna buƙatar bayanin kula na musamman. |
Ma'aunin fasaha na Valve
| Girman ƙima, DN | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | ||
| Ƙididdigar ƙididdiga masu gudana, Cv | Kashi | 8 | 12 | 20 | 32 | 50 | 70 | 100 | 200 | 240 | ||
| Litattafai | 5 | 10 | 16 | 25 | 38 | 63 | 80 | 120 | 220 | 300 | ||
| Tafiya | 16mm ku | 25 mm ku | 40mm ku | 60mm ku | ||||||||
| Mai kunna huhu Yankin tasiri na diaphragm, Ae (cm2) | ZHA/B-22 | ZHA/B-23 | ZHA/B-34 | ZHA/B-45 | ||||||||
| 350 | 350 | 560 | 900 | |||||||||
| Aiki | Tsawon bazara | Pneumatic PTFE PFA Layi mai sarrafa diaphragm bawul Max.bambancin matsa lamba (MPa) | ||||||||||
| Bude iska | 20-100KPa | 1.16 | 0.7 | 0.44 | 0.28 | 0.18 | 0.17 | 0.11 | 0.07 | 0.07 | 0.05 | |
| 40-200 KPA | 3.34 | 2.14 | 1.31 | 0.84 | 0.53 | 0.51 | 0.33 | 0.21 | 0.22 | 0.15 | ||
| 80-240 KPA | 6.4 | 4.99 | 3.05 | 1.95 | 1.25 | 1.18 | 0.78 | 0.5 | 0.51 | 0.36 | ||
| Air rufe | 20-100KPa | 2.23 | 2.14 | 0.87 | 0.56 | 0.35 | 0.34 | 0.22 | 0.14 | 0.15 | 0.1 | |
| 40-200 KPA | 6.4 | 6.4 | 5.86 | 3.64 | 2.3 | 2.21 | 1.43 | 0.91 | 0.95 | 0.66 | ||
| 80-240 KPA | 6.4 | 6.4 | 6.4 | 5.04 | 3.18 | 3.06 | 1.98 | 1.26 | 1.32 | 0.92 | ||
Ku rubuta sakonku anan ku aiko mana
